Bestech Nogard Black Titanium/Black Red Marblee Carbon Fiber, Satin/Black Stonewashed M390 by Kombou Knife (BT2105D)
- Nogard Black Titanium / Black Red Marble Carbon Fiber, Satin / Black Stonewashed compact EDC folder for discerning buyers, the result of a collaboration between Polish designer Grzegorz "Kombou" Grabarski and Bestech Knives.
377,35 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Nogard Black Titanium / Black Red Marble Carbon Fiber, Satin / Black Stonewashed compact EDC folder for discerning consumers, the result of cooperation between Polish designer Grzegorz "Kombou" Grabarski and Bestech Knives company. Ergonomic Handle, excellent blade steel!!!
Grzegorz "Kombou" Grabarski - Polish graphic designer, photographer and talented designer, the main creator of knife designs at Bestech Knives. Known for his unconventional ideas, breaking the stereotypes of knife design. A long collaboration with Bestech has resulted in exquisitely crafted knives made of the finest materials, with a unique look.
M390 Microclean® - martensitic high-performance chrome steel produced by powder metallurgy. Due to its alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of "wire" during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - wide, Sheepfoot type with a striking Two Tone finish, satin cut, the rest of the blade finished in Black Sronewashed. The slightly curved cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearing ceramic supports the opening of the blade with a quick flipper (index-finger flipper) when opened acting as a stag. We can also open the knife using a hole in the wedge (thumb hole). A section of the back of the wedge is covered with an upper jimping, a notched thumb rest for easy control of the knife. The whole thing is locked with a proven and popular frame lock with a steel insert to prevent wiping of the lock face.
Handle - is two pieces of solid 6AL4V titanium with striking Black Red Marble Carbon Fiber inserts. The chamfered edges of the covers eliminate sharp edges for comfort, and the fore finger groove improves grip security. The solid titanium backspacer to which the grips are attached guarantees the rigidity and strength of the entire structure. A single-position, right-hand titanium clip allows the knife to be carried in tip-up position, with the tip of the blade upward.
Case - the knife is packed in a zippered nylon soft pouch with the brand's logo for safe carrying and storage of the folder.
Technical data:
Product number: BT2105D
Product name: Nogard Dark Titanium / Black Red Marble Carbon Fiber, Black Stonewashed / Satin
Overall length: 203.0 mm / 7.99"
Blade length: 85.0 mm / 3.35"
Blade thickness: 3.8 mm / 0.15"
Handle length: 118.0 mm / 4.64"
Handle thickness: n.d.
Weight: n.d.
Blade material: M390 Microclean®
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Two Tone, Satin / Black Stonewashed
Handle material: Titanium 6AL4V / Black Red Marble Carbon Fiber.
Handle finish color: Black / Red
Backspacer material: Titanium 6AL4V
Backspacer color: Black
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Frame Lock
Opening method: Manual, thumb hole, flipper
Additional accessories: Pouch
Designer: Grzegorz "Kombou" Grabarski
Brand name: Bestech
Manufacturer: Bestech Knives
Country of origin: P.R.C
Developed by: the Sharg® company
