WE Knife Orpheus LE No 107/155 Gray Titanium/Nebula Fat Carbon, Hand Rubbed Satin CPM 20CV (WE23009-4)
- Orpheus No 107/155 Gray Titanium / Nebula Fat Carbon, Hand Rubbed Satin LE (Limited Edition). Limited to 155 pieces, the limited edition of the elegant EDC WeKnife No 107 is a design where form follows function!
495,23 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Orpheus Gray Titanium / Nebula Fat Carbon, Hand Rubbed Satin LE (Limited Edition). Limited to 155 pieces, the limited edition of the elegant EDC knife No 107 is an example of a design philosophy where form follows function. A perfectly crafted folder with a solid titanium handle and a Blade made of excellent CPM 20CV steel. This remarkable knife will stand out among others!
CPM 20CV - one of the best tool steels, American premium martensitic stainless steel. Produced by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 1.9% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - clip point type, finished by hand with an elegant Satin method. The elongated belly extends the length of the cutting edge in relation to the length of the blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearing ceramic supports the opening of the blade with a quick flipper (index-finger flipper) when opened acting as a stag. The entire blade is locked with the proven and popular frame lock with a steel insert to prevent the lock face from rubbing off.
Nebula Carbon Fiber - a project by Fat Carbon, specializing in the production of epoxy-carbon composites (carbon fiber), used among others for knife handle scales! The unique pattern is inspired by the beauty and mystery of a distant galaxy and the nebula within it, specifically the Veil Nebula. A remnant of a supernova, it serves as the inspiration for this product, boasting an aesthetic appeal throughout its entire thickness. The Nebula pattern is consistent across the full thickness of the slab, allowing for breathtaking rendering on any knife handle.
Handle - made of solid 6AL4V titanium, the artful Fat Carbon Nebula inserts contrast beautifully with the titanium. Contouring of the covers eliminates sharp edges. The grips are joined together with a titanium backspacer. The textured surface improves grip confidence. The simplicity and robustness of the design give confidence in many years of use. The single-position clip (right), made of titanium, allows the knife to be carried in tip-up position. The backspacer has a place for threading a safety or decorative cord. The decorative finish of the pivot bolt is made of flame-dyed 6AL4V titanium.
Case - included zippered soft nylon case with manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE23009-4
Product name: Orpheus LE No 107/155 Gray Titanium / Nebula Fat Carbon, Hand Rubbed Satin
Overall length: 216.2 mm / 8.51"
Blade length: 88.4 mm / 3.48"
Blade thickness: 3.2 mm / 0.13"
Handle length: 127.8 mm / 5.03"
Handle thickness: 13.3 mm / 0.52"
Weight: 121.5 g / 4.29 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Hand Satin
Handle material: 6AL4V Titanium with Fat Carbon Nebula Inlay
Handle finish color: Black / Gray / Blue
Backspacer material: 6AL4V Titanium
Backspacer color: Gray
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Frame Lock
Opening method: Manual, flipper
Additional accessories: Pouch
Designer: We Knife
Brand name: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Developed by: the Sharg® company
