Microtech MSI S/E Fluted OD Green Aluminium, Apocalyptic Stonewashed M390MK by Tony Marfione (210-10APFLOD)
- MSI S/E Fluted OD Green Aluminium, Apocalyptic strong folding knife with intuitive RAM-Lock. Superior M390MK blade steel, the result of collaboration between Microtech and Bohler engineers. Ergonomic aluminum handle. Designed by Anthony Marfione!
429,56 €
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
MSI S/E Fluted OD Green Aluminum, Apocalyptic folding knife that combines strength, durability and elegance. Its blade is made of excellent M390MK steel , which is the result of a collaboration between two renowned companies - Microtech and Böhler. This steel is known for its exceptional strength and long sharpness retention, making this knife unafraid of any challenge. The intuitive RAM-Lock lock ensures safety during use. This innovative lock is easy to operate and provides ease of use for both right and left-handed people. The Handle of the knife is made of aluminum, durable and ergonomic. Its shape is designed to fit perfectly in the hand, ensuring comfort even during prolonged use. This knife is not only a tool, but also a work of applied art. Its designer, Anthony Marfione, founder and owner of Microtech, has taken care of every detail. From the elegant finish to the satin details, this knife is both beautiful and practical. Whether you're looking for a reliable tool or an elegant accessory, this knife will meet your needs.
M390MK - thanks to a collaboration between Microtech and Böhler engineers, an exclusive version of M390 steel made only for Microtech was created. The carbon content has been increased and subjected to closer scrutiny thus improving the properties of M390 steel to provide better edge retention, corrosion resistance and polishing. Martensitic high-performance chromium steel produced by powder metallurgy. Due to its alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 19.0% (Cr) doped with 1.95% carbon (C), vanadium 4.0% (V), and is hardened to 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Ram-Lock (Crossbar Lock) - a crossbar that moves horizontally in longitudinal cutouts in the steel side plates of the handle frame. When the knife is opened, the locking bar overlaps the back of the blade from above, preventing its return movement. This beam is pressed down by two springs. Unlocking is done by pulling back the locking bar, the ends of which are accessible through cutouts in the grips on the sides of the Handle grips. In the locked position, the bar presses against the cam surface at the rear of the blade, preventing it from opening on its own. Advantages of the Ram-Lock include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both right and left hands, and lightweight operation.
Blade - machine ground Sheepfoot type , single sided S/E (Single Edge) sharpened. Finished with a striking Apocalyptic patination . Opening by means of a hole in the wedge (thumb hole), so it can be easily used by right and left-handed people . The blade is derived with a high flat grind (Flat Grind), giving excellent cutting edge geometry and extreme cutting performance. In order to maintain full control over the blade on the back of the wedge was made upper jimping, notched thumb rest. The whole is locked with a convenient Ram-Lock.
Handle - made with excellent precision in 3D technology on CNC milling machines from anodized aluminum 6061-T6, for better grip covered with milled lines (Fluted). Wide locking slide with Microtech's characteristic stepped X structure . Both grips are bolted together with a solid aluminum backspacer. The double-sided (right / left) clip allows you to discreetly carry the knife in tip-up position. Above the clip a lanyard hole, a place for a safety or decorative cord.
Technical data:
Product number: 210-10APFLOD
Product name: MSI® S/E Fluted OD Green Aluminum, Apocalyptic
Overall length: 229.0 mm / 9.0”
Blade length: 102.0 mm / 4.0”
Blade thickness: 3.8 mm / 0.15”
Handle length: 130.0 mm / 5.125”
Handle thickness: 14.5 mm / 0.57”
Weight: 133.0 g / 4.7 oz
Blade material: Böhler M390MK
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Apocalyptic
Handle material: 6061-T6 Aluminum
Handle finish color: OD Green
Backspacer material: 6061-T6 Aluminum
Backspacer color: Gray
Clip: Right/left, Tip-up
Clip material: Stainless Steel
Pivot mechanism: n.d.
Locking mechanism: Ram-Lock
Opening method: Manual, thumb hole
Additional accessories: none
Designer: Anthony Marfione
Brand: Microtech Knives
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: the Sharg® company
