WeKnife Exciton LE No 278/310 Polished Gray Titanium, Polished Gray CPM 20CV (WE22038A-7)
- Exciton Polished Gray Titanium, Polished Gray LE. Limited edition WE Knife restricted to just 310pcs, knife numbered 278. Striking folder with polished gray titanium handle and blade (CPM 20CV). Integral titanium backspacer, strong button lock. Must have!
458,52 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Exciton Polished Gray Titanium, Polished Gray LE (Limited Edition) – a folding knife limited to just 310 pieces, with serial number 278. Striking folder with polished gray titanium handle, polished gray CPM 20CV steel blade with beautiful integral titanium backspacer and strong button lock. It's what precision knife making is all about. The perfect EDC, for those who want to stand out!
CPM 20CV - one of the best tool steels, American premium martensitic stainless steel. Manufactured by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 1.9% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels
Blade - Drop point type, polished and then coated with a gray coating. The gently curved cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength, a mixed grind is used in this knife, in the back part is a high concave grind for cutting and precision work, the so-called Hollow Ground Primary Bevel. In the front part, we have a high Flat Ground tip reinforcement grind. To improve piercing capabilities, an unsharpened false blade is brought out at the top. Ball bearing ceramic supports the opening of the blade with a quick flipper (index-finger flipper) when opened acting as a stag. We can also open the knife using a hole in the wedge (thumb hole). The whole thing is locked with a solid button lock. A spring is mounted under the lock button, providing sufficient resistance to avoid accidental opening.
Handle - made of polished gray titanium 6AL4V. Contouring of the covers eliminates sharp edges. Grips are connected to each other with a titanium integral backspacer. The surface texture improves grip confidence. The simplicity and robustness of the design give confidence for many years of use. The single-position (right) clip, also made of titanium, allows the knife to be carried in tip-up position.
Case - included zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE22038A-7
Product name: Exciton Polished Gray Titanium, Polished Gray LE No 278/310
Overall length: 220.5 mm / 8.68"
Blade length: 93.5 mm / 3.68"
Blade thickness: 3.2 mm / 0.13"
Handle length: 127.0 mm / 5.0"
Handle thickness: 12.2 mm / 0.48"
Weight: 124.3 g / 4.38 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade Grinding: Compound with Hollow Ground Primary Bevel & Flat Ground Tip
Blade Finish: Polished Gray
Handle material: 6AL4V Titanium
Handle finish color: Polished Gray
Backspacer material: 6AL4V Titanium
Backspacer color: Gray
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Button Lock
Opening method: Manual, flipper, thumb hole
Additional accessories: Pouch
Designer: We Knife
Brand: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Developed by: the Sharg® company
