Sencut Tauron Knife Black G10, Stonewashed D2 (S25060-1)
- Tauron Black G10, Stonewashed is a rugged EDC folding knife designed as a versatile everyday tool, combining a utilitarian clip point geometry, a durable Blade with a stonewashed finish and an ergonomic G10 Handle.
46,11 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
The Tauron Black G10, Stonewashed represents one of the most pragmatic offerings in the Sencut brand's lineup, aimed at users seeking a balanced EDC knife for regular, practical tasks. The design of this folder is based on proven utility solutions aimed at ensuring stability, predictability of operation and comfort in everyday use. The whole design has been kept in a subdued, technical aesthetic, thanks to which Tauron does not impose itself on form, but consistently performs the function of a working tool. Blade made of D2 tool steel was selected for intensive use, offering good sharpness retention and wear resistance for repetitive use tasks. The clip point profile provides a precisely outlined tip, facilitating control for jobs requiring precise blade guidance. The flat grind used creates a clear, flat geometry that promotes efficient cutting while maintaining edge stability. The stonewashed finish reduces the visibility of wear marks and emphasizes the utilitarian nature of the knife, making it a tool suited for everyday work rather than occasional use. The G10 composite handle is designed for a secure, stable grip in a variety of conditions. Its ergonomic profile fits well in the hand, allowing controlled work for both lighter tasks and more forceful cuts. The material provides adequate grip and resistance to moisture and changing environmental conditions, making the Tauron a practical knife for everyday carry. The Sencut Tauron is an option for users looking for a reliable EDC knife that will perform well in routine daily tasks with durability, control and predictable performance.
D2 - a high-carbon, high-chromium high-speed tool steel heat-treated to 58-60 HRC. With a high 13.0% chromium (Cr) content, it offers greater corrosion resistance than most high-carbon steels. Combines strength, excellent edge holding and easy sharpening. Features high wear resistance due to high carbide content in the microstructure.
Blade - with a clip point profile , designed with an emphasis on precision work and tip control, which is crucial for tasks that require accurate blade guidance. This shape makes it easier to initiate a cut and allows the blade tip to operate efficiently in the material. The flat grind used provides a usable geometry that promotes smooth and clean cutting while maintaining adequate blade rigidity. The stonewashed finish reduces the visibility of minor signs of use and gives the surface a technical, practical character. Opening is carried out with a thumb stud and a flipper, which allows quick and convenient operation with one hand. For safe operation is responsible for the liner lock, which stabilizes the blade in the open position and ensures predictable operation of the mechanism.
Handle - made of G10 composite is characterized by high mechanical resistance and stability in changing conditions of use. Its profile was shaped to guide the hand in the natural axis of the blade's work, providing a secure grip for both precise and more decisive work. The textured material improves tool control and reduces the risk of slippage. The steel liner-based design increases the rigidity of the overall body and enhances the feeling of solidity. Deep-carry pocket clip allows you to carry the knife discreetly and conveniently in your pocket, maintaining quick access in everyday carry. The whole creates a handle that is durable, functional and fully subservient to the utilitarian role of an EDC knife.
Technical data:
Product number: S25060-1
Product name: Tauron Black G10, Stonewashed
Overall length: 203.3 mm / 8.0"
Blade length: 88.4 mm / 3.48"
Blade thickness: 3.0 mm / 0.12"
Handle length: 114.9 mm / 4.52"
Handle thickness: 12.0 mm / 0.47"
Weight: 108.9 g / 3.84 oz
Blade material: D2
Blade hardness: 59-61 HRC
Blade grind: Flat
Blade finish: Stonewashed
Handle material: G10
Handle finish color: Black
Backspacer material: Stainless Steel (spacer sleeves)
Backspacer color: Gray
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Liner Lock
Opening method: Manual, thumb stud, flipper
Additional accessories: Pouch
Designer: Sencut
Brand: Sencut Knife
Manufacturer: WeKnife Co., Ltd.
Country of origin: P.R.C
Developed by: the Sharg® company
Microtech LUDT Gen III T/E Automatic Knife Black Aluminum, Black M390MK by Tony Marfione (1136-1T)
