WeKnife Orc Boss Knife Gray Titanium/Aluminum Foil Carbon Fiber, Gray CPM 20CV by Grant Chambers (WE24042-3)
- The Orc Boss Gray Titanium/Aluminum Foil Carbon Fiber, Gray is a premium folding knife that combines aggressive geometry, precision craftsmanship and premium materials. Grant Chambers' design is distinguished by its massive form and refined mechanics.
528,70 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Grant Chambers is a Canadian silversmith by training and knife maker by passion, who has been designing and making his own blades for more than fifteen years, combining the precision of jewelry craftsmanship with utilitarian functionality. He created his first knife out of a fascination with form and material - today he sketches new designs every day, where practicality rather than decorativeness remains the priority. His works range from modern folding knives with distinctive blade geometry to unique pieces with collector value, which attracts enthusiasts looking for tools with individual character and high quality workmanship.
CPM 20CV - one of the best tool steels, a premium American martensitic stainless steel. Produced by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy(CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 1.9% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade – Hawkbill profile, made from CPM 20CV powdered steel. The polished gray finish reduces the visibility of minor scratches and reflections, giving the blade a raw, technical appearance. The aggressively shaped blade profile with dynamic curvature promotes precise cutting while providing additional material in key working areas, increasing overall structural stability. A precise compound grind supports smooth material penetration, while the appropriate spine thickness prevents blade twisting and enhances cutting confidence under load. The thumb stud allows intuitive, controlled blade deployment, ensuring smooth operation and compliance with the high standards of WE Knife.
Handle - based on milled titanium, guarantees structural rigidity, high mechanical resistance and optimal weight distribution. Its form was designed for a strong, stable grip - pronounced curves and undercuts guide the hand naturally, supporting control even during prolonged work. The Aluminum Foil Carbon Fiber insert not only enhances the aesthetics, but also increases the grip and ergonomics of hand contact with the knife surface. Thanks to the precise fit of materials and attention to finish, the handle retains a modern, sculptural character, without sacrificing comfort in use. A clip with an integrated, minimalist form allows the knife to be carried comfortably and discreetly. The Orc Boss design combines massiveness, technological precision and premium aesthetics, creating a high-end folder designed for the most demanding users.
Technical data:
Product number: WE24042-3
Product name: Orc Boss Gray Titanium/Aluminum Foil Carbon Fiber, Gray
Overall length: 232.0 mm / 9.13"
Blade length: 97.0 mm / 3.82"
Blade thickness: 4.5 mm / 0.18"
Handle length: 135.0 mm / 5.31"
Handle thickness: 17.5 mm / 0.69"
Weight: 233.5 g / 8.24 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade grind: Compound
Blade finish: Polished Gray
Handle material: Titanium 6AL4V / Aluminum Foil Carbon Fiber
Handle finish color: Polished Gray / Black
Backspacer material: Titanium 6AL4V
Backspacer Color: Polished Gray
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Nested Liner Lock
Opening method: Manual, thumb stud
Additional accessories: Pouch
Designer: Grant Chambers
Brand name: WeKnife
Manufacturer: WE Knife Co., Ltd
Country of origin: P.R.C.
Developed by: the Sharg® company
Spyderco Military 2 Knife Cobalt Blue G10, Satin CPM SPY27 by Sal, Eric Glesser (C36GPCBL2)
Spyderco Para 3 Knife Digital Camo G10, Black DLC CPM S45VN by Sal, Eric Glesser (C223GPCMOBK)
LionSteel Q4ttro Knife Blue Titanium / Fat Carbon, Satin MagnaCut by Molletta (Q4 BL)
