Microtech Dirac D/E OTF Knife Blue Aluminium, Black Cerakote M390 by Tony Marfione (225-1BL)
- Dirac D/E Blue Aluminum, Black Cerakote is a compact OTF automatic knife from the Dirac series. Operating in D/A mode, it features a hell of a fast blade extension mechanism. Slider button on the side of the handle. Designed by Tony Marfione of Microtech.
329,12 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Dirac D/E Blue Aluminum, Black Cerakote is a compact OTF automatic knife from the Dirac series. Operating in D/A mode, equipped with a lightning-fast blade extension mechanism. Slider button on the side of the handle. 100% manufactured and assembled in the USA. Designed by Anthony Marfione, knifemaker and owner of Microtech Knives.
Dirac® - the first OTF (Out The Front) D/A (Double Action) automatic knife in the Microtech range with a slider located in the recess of the handle. Modernized, ergonomic handle with curved lines similar to HALO®. This line features Microtech®'s signature ultra-high-quality solutions, such as patented screws, an innovative internal mechanism, and a glass breaker. With a total length of 7.25 inches, the Dirac® is perfect for everyday carry (EDC).
M390 Microclean® - martensitic high-performance chromium steel produced by powder metallurgy. Due to its alloy concept, it is characterized by exceptionally high wear resistance and high corrosion resistance. Thanks to its high wear resistance, it retains its edge shape well, so the blade stays sharp for a very long time (requires minimal maintenance). Another advantage is its resistance to “wire” formation during sharpening. Steel with a high chromium content of 20.0% (Cr) with an admixture of 1.9% carbon (C), 4.0% vanadium (V), hardened in the range of 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Cerakote™ - a ceramic-based finish that can be applied to metals to improve a number of physical properties, including abrasion/wear and corrosion resistance. A thin-layer, non-reflective, matte protective coating with a low coefficient of friction, resistant to high temperatures, chemicals, and impact. Provides durability and hardness.
Blade - machine-ground D/E (Double Edge) Dagger, sharpened on both sides with a long line of blood grooves on both sides of the blade for reinforcement. The durability of the blade surface is increased by a non-reflective, matte Black Cerakote coating, which has unique properties: exceptional hardness, low friction, and excellent corrosion protection. The blade has a high flat grind, ensuring excellent cutting properties. This gives the knife excellent piercing properties while maintaining high strength. Centrally located blood grooves further reinforce the blade. The strong mechanism for extending/retracting the blade using a knurled Thumb Slide, a stepped slider under the thumb, requires a certain amount of force to overcome the spring resistance for safety reasons. The opening method ensures trouble-free opening for both right- and left-handed users.
Handle - made with excellent precision using 3D technology on CNC milling machines, from polished and brushed 6061-T6 aluminum. The texture of the handle surface prevents the knife from slipping in your hand during use. There are jimping cuts on the back and bottom of the handle for a more secure grip. A characteristic feature is the location of the slider in a recess milled on the side of the handle. This allows the hand to rest more naturally when opening and closing the knife. The slim profile and milled two-position (right/left) solid deep carry clip allow the knife to be carried discreetly in a pocket in the tip-down position (with the tip of the blade pointing downwards). The clip features the Microtech logo, serial number, and date of manufacture. The handle is finished with a glass breaker, a solid steel triangle with a tungsten carbide ball pressed into it.
Technical data:
Product number: 225-1 BL
Product name: Dirac® D/E Blue Aluminum, Black Standard
Overall length: 184.0 mm / 7.25“
Blade length: 73.0 mm / 2.875”
Blade thickness: 2.3 mm / 0.09"
Handle length: 102.0 mm / 4.0“
Handle thickness: 10.7 mm / 0.42”
Weight: 65.2 g / 2.3 oz
Blade material: Böhler M390
Blade hardness: N/A
Blade grind: Flat
Blade finish: Black Cerakote coating
Handle material: 6061-T6 Aluminum
Handle finish color: Blue
Backspacer material: 6061-T6 Aluminum
Backspacer color: Blue
Clip: Right/left, Tip-down
Clip material: Stainless Steel
Pivot mechanism: N/A
Lock: Slide Lock
Opening method: Automatic, push/pull Thumb slider
Additional accessories: None
Designer: Anthony Marfione
Brand: Microtech Knives
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: Sharg®
WeKnife Brr15 Black Titanium/Copper Foil Carbon Fiber, Black Stonewashed/Satin M390 by Rafal Brzeski (WE24007-1)
Spartan Blades Harsey Folder ''Plague Doctor'' Blue Titanium, Satin MagnaCut by William W. Harsey (SF5DOCTOR BL)
Viper Knife Golia Evolution Black Canvas Micarta, DSW by Rumici (VT4003ECB)
