Kubey KB Knives Venom Gray Titanium, Satin CPM S90V by James Lowe (KB435A)
- Venom Gray Titanium, Satin, a premium EDC folding knife designed by James Lowe. The blade is made of high-quality CPM S90V steel, and the comfortable titanium handle features radial milling for improved grip. Top Liner Lock.
232,87 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
KB Knives Venom Gray Titanium, Satin CPM S90V by James Lowe (KB435A) is a premium EDC titanium folder featuring a Sheepsfoot blade, CPM S90V steel, and a Top Liner Lock.
KB Knives Venom – a precision EDC folding knife designed by James Lowe
KB Knives Venom Gray Titanium, Satin CPM S90V by James Lowe (KB435A) combines a compact, refined design with a Sheepsfoot blade, designed for controlled cutting and everyday utility. James Lowe’s design features a titanium handle with a Gray Sandblasted / Radial Milling finish, which gives the knife a technical look and enhances the visual depth of the surface. The Top Liner Lock, ceramic ball bearings, and two opening mechanisms create a functional premium folder for EDC and outdoor use.
The blade is made of CPM S90V powder-coated steel, which has undergone vacuum heat treatment and a cryogenic process. A hardness of 60–62 HRC ensures long-lasting sharpness, and the flat grind allows the blade to cut through cardboard, packaging, ropes, and plastics with ease. The Satin finish highlights the blade’s lines while maintaining an elegant, functional look. Opening via thumb studs or the thumb hole allows the user to choose their preferred method of operation.
CPM S90V Sheepsfoot blade
The Sheepsfoot profile offers a long, practical cutting edge and a lowered tip, which facilitates controlled cutting and reduces the risk of accidentally piercing the material. This geometry works well for precisely cutting cardboard, tape, cord, and packaging. The flat grind reduces resistance during use, while the Satin finish gives the blade a clean, technical-yet-elegant look.
CPM S90V is a premium powder-metalled steel, valued for its very high abrasion resistance and exceptionally long edge retention. It requires a bit more patience when sharpening than more popular EDC steels, but it rewards you with a stable edge during regular use. Vacuum treatment and cryogenic freezing ensure uniform material properties at a hardness of 60–62 HRC.
Titanium handle with radial milling and Top Liner Lock
The handle, made of Titanium, ensures high rigidity, mechanical strength, and low weight. The Gray Sandblasted / Radial Milling finish combines a matte surface with decorative and functional milling, which enhances the visual appeal and supports a more secure grip on the knife. The titanium backspacer and clip maintain material consistency throughout the entire construction.
The Top Liner Lock stabilizes the blade when open, while maintaining convenient access to the mechanism. Ceramic ball bearings ensure smooth pivot operation, and the opening system via thumb studs or thumb hole offers the user two methods of manual operation. The right-hand titanium tip-up clip allows for discreet carry in a right-hand pocket, and the included Pouch protects the knife during daily carry.
Key Features at a Glance
- Blade: CPM S90V steel with a hardness of 60–62 HRC, Sheepsfoot profile, flat grind, and Satin finish.
- Handle: gray, sandblasted titanium with radial milling.
- Mechanics: ceramic ball bearings, thumb studs, thumb hole, and Top Liner Lock.
- Carrying: right-side titanium clip, tip-up, and protective Pouch case.
- Application: premium EDC, outdoor, and everyday tasks requiring precise cutting.
Technical Specifications
| Product Number | KB435A |
| Product name | KB Knives Venom Gray Titanium, Satin CPM S90V by James Lowe |
| Overall length | 188.00 mm / 7.40" |
| Blade length | 88.00 mm / 3.46“ |
| Blade thickness | 3.10 mm / 0.12” |
| Handle length | 100.00 mm / 3.94“ |
| Handle thickness | 10.00 mm / 0.39” |
| Weight | 98.00 g / 3.46 oz |
| Blade material | CPM S90V |
| Blade hardness | 60–62 HRC |
| Blade profile | Sheepsfoot |
| Blade grind | Flat |
| Blade finish | Satin |
| Handle Material | Titanium |
| Handle Finish Color | Gray Sandblasted / Radial Milling |
| Backspacer Material | Titanium |
| Backspacer color | Gray |
| Clip | Right, Tip-Up |
| Clip material | Titanium |
| Pivot mechanism | Ceramic ball bearings |
| Lock | Top Liner Lock |
| Opening method | Manual, thumb studs, thumb hole |
| Additional accessories | Pouch |
| Designer | James Lowe |
| Brand | KB Knives |
| Manufacturer | Kubey Knife |
| Country of origin | China |
Frequently Asked Questions
What is the KB Knives Venom designed for?
The Venom is ideal as a premium EDC folder for precise cutting of cardboard, packaging, ropes, plastics, and everyday materials, as well as a lightweight outdoor knife.
What makes the Top Liner Lock stand out?
The Top Liner Lock stabilizes the blade when open and allows for a slim handle profile. The mechanism is well-suited for a folding knife designed for precision, lightness, and ease of use.
How to care for CPM S90V steel and how to sharpen it?
The blade should be cleaned, thoroughly dried, and periodically coated with a thin layer of oil. For sharpening CPM S90V, it is best to use diamond or CBN wheels, as the steel has very high wear resistance.
What sharpening angle does the manufacturer recommend?
The manufacturer specifies a range of 15°–20°. A lower angle improves cutting aggressiveness, while an angle closer to 20° increases edge durability during heavier use.
How can the blade be opened?
The blade can be opened using thumb studs or a thumb hole. Ceramic ball bearings ensure smooth and consistent operation of both methods.
Prepared by: Specialists at Sharg® – Your expert in EDC and cutting tools
Microtech 6'' Santoku Knife Caribbean Blue G10, Stonewashed M390MK (3200-10CA)
Medford 187 DP Black PVD ''Ghosted Flag'' Titanium, PVD HW, PVD w/Bronze Clip, Black PVD D2 by Greg Medford (MK002DPQ-30PV-TPCP-Q4)
