Kubey KB Knives Sudden Gray Titanium/Timascus, Bead Blasting 20CV by Utilizator (KB385A)
- Sudden Gray Titanium/Timascus, Bead Blasting—a modern premium folding knife designed by Utilizator. The blade is made of CPM 20CV powder-coated steel, and it features a comfortable titanium handle. It has a reliable Frame Lock and ceramic ball bearings.
221,82 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
KB Knives Sudden Gray Titanium/Timascus, Bead Blasting 20CV by Utilizator (KB385A) is a premium EDC titanium folder featuring a Sheepsfoot blade, Timascus liners, and a Frame Lock mechanism.
KB Knives Sudden – a technical EDC folding knife designed by Utilizator KB Knives Sudden Gray Titanium/Timascus, Bead Blasting 20CV by Utilizator (KB385A) combines compact, functional geometry with the distinctive aesthetics of titanium and decorative Timascus inlays. The Utilizator design was created for users who expect precise mechanics, solid construction, and a distinctive form from a premium folding knife. The Sheepsfoot blade, sandblasted titanium handle, and Frame Lock create a cohesive folding knife for everyday carry. Opening via the front flipper or thumb hole allows the user to adapt the operation to the situation and their preferences.The blade is made of 20CV steel, which has undergone vacuum heat treatment and a cryogenic process. A hardness of 60–62 HRC ensures long-lasting sharpness, while the flat grind supports smooth and controlled cutting. Ceramic ball bearings ensure smooth operation of the mechanism, and the titanium tip-up clip allows for convenient carrying of the folder in a right-hand pocket. The included Pouch protects the knife during transport and storage.
20CV Steel Sheepsfoot Blade
The Sheepsfoot profile provides a long, functional cutting edge and a lowered tip, which facilitates controlled cutting and reduces the risk of accidentally piercing the material. This geometry works well with cardboard, packaging, ropes, plastics, and everyday tasks requiring precise blade guidance. The flat grind reduces resistance during cutting, and the Bead Blasting finish gives the surface a uniform, matte texture.
20CV steel is distinguished by high wear resistance, very good corrosion resistance, and long-lasting sharpness. Vacuum treatment and a cryogenic process help achieve stable properties at a hardness of 60–62 HRC. The material is well-suited to the nature of a premium EDC folder, where edge durability and reduced sharpening frequency are key.
Titanium Handle with Timascus and Frame Lock
The handle is made of Titanium, achieving high structural rigidity and a favorable weight-to-durability ratio. The Gray Sandblasted finish gives the surface a subdued, technical character, while decorative Timascus inlays add a multicolored accent and emphasize the model’s collectible nature. A titanium backspacer reinforces the rear of the handle and maintains full material consistency.
The Frame Lock utilizes a spring-loaded section of the titanium handle to stabilize the blade in the open position. Ceramic ball bearings ensure smooth pivot operation, and two opening methods—front flipper and thumb hole — allow you to choose between a more dynamic or controlled operation. The right-side, tip-up titanium clip allows for discreet carry in a right-side pocket.
Key features at a glance
- Blade: 20CV steel with a hardness of 60–62 HRC, Sheepsfoot profile, flat grind, and Bead Blasting finish.
- Handle: gray, sandblasted titanium with decorative Timascus inserts.
- Mechanics: ceramic ball bearings, front flipper, thumb hole, and Frame Lock.
- Carrying: right-side titanium clip, tip-up, and protective pouch.
- Application: premium EDC, precision cutting, and everyday utility tasks.
Technical Specifications
| Product Number | KB385A |
| Product name | KB Knives Sudden Gray Titanium/Timascus, Bead Blasting 20CV by Utilizator |
| Overall length | 198.00 mm / 7.80“ |
| Blade length | 88.00 mm / 3.46” |
| Blade thickness | 3.50 mm / 0.14“ |
| Handle length | 110.00 mm / 4.34” |
| Handle thickness | 13.00 mm / 0.51" |
| Weight | 113.00 g / 3.99 oz |
| Blade material | 20CV |
| Blade hardness | 60–62 HRC |
| Blade profile | Sheepsfoot |
| Blade grind | Flat |
| Blade Finish | Bead Blasting |
| Handle Material | Titanium / Timascus |
| Handle Finish Color | Gray Sandblasted |
| Backspacer Material | Titanium |
| Backspacer Color | Gray |
| Clip | Right, Tip-Up |
| Clip Material | Titanium |
| Pivot Mechanism | Ceramic Ball Bearings |
| Lock | Frame Lock |
| Opening method | Manual, front flipper, thumb hole |
| Additional accessories | Pouch |
| Designer | User |
| Brand | KB Knives |
| Manufacturer | Kubey Knife |
| Country of origin | China |
Frequently Asked Questions
What is the KB Knives Sudden designed for?
The Sudden is ideal as a premium EDC folder for cutting cardboard, packaging, ropes, plastics, and tasks requiring a controlled Sheepsfoot blade.
How does the Frame Lock work?
Frame Lock uses a spring-loaded part of the titanium handle to support the blade when open. The mechanism ensures high rigidity, simple operation, and a minimal number of moving parts.
How to care for 20CV steel and how to sharpen it?
The blade should be cleaned, thoroughly dried, and periodically coated with a thin layer of oil. For sharpening 20CV steel, it is best to use diamond or CBN wheels, finishing the job with a fine grit.
What sharpening angle does the manufacturer recommend?
The manufacturer specifies a range of 15°–20°. A lower angle improves cutting aggressiveness, while a value closer to 20° increases edge durability during heavier use.
How can the blade be opened?
The blade can be opened using a front flipper or a thumb hole. Ceramic ball bearings ensure smooth and consistent operation of both methods.
Prepared by: Specialists at Sharg® – Your expert in EDC and cutting tools
ESP hardened expandable baton 21'' (EXB-21H CHR BH-54)
