Bestechman Cicada's Wing Knife Mirror Polished Frag Stainless Steel, Black PVD 10Cr15MoV (BMK06-S-6)
- Cicada's Wing Mirror Polished Frag Stainless Steel, Black PVD—a versatile EDC knife. Features a 10Cr15MoV stainless steel sheepfoot blade, a reliable lock, a thumb stud, and a steel handle. A knife you can always carry with you!
40,42 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Cicada's Wing Mirror Polished Frag Stainless Steel, Black PVD, a versatile and reliable EDC folding knife that is sure to meet the expectations of even the most demanding users. The sheepfoot blade is made of high-quality 10Cr15MoV stainless steel, offering excellent corrosion resistance and exceptional blade durability, ensuring long-lasting and effective use. The handle, made of stainless steel with a milled surface texture resembling shrapnel (Frag), guarantees a secure and comfortable grip, even in difficult conditions. The reliable B-Lock ensures safety during use, and the B double-sided opening pinB allows for quick and easy one-handed deployment, which is extremely practical in situations requiring an immediate response. Thanks to its excellent value for money, the Bestechman Cicada’s Wing knife is an excellent choice for anyone looking for a reliable everyday tool. Its compact size and sturdy construction mean you can always carry it with you, ready for use in any situation. This is a knife that combines functionality, aesthetics, and durability, making it an indispensable companion for everyday challenges.
Bestechman - a sub-brand of Bestech Knives, a company that manufactures knives of the highest global quality. Production takes place on the same production lines as Bestech, ensuring the highest assembly standards are maintained.
10Cr15CoMoV - easy-to-sharpen, high-carbon stainless steel, equivalent to Japanese AUS-10 steel. Thanks to its properties, it retains its sharpness and corrosion resistance for a long time. It is characterized by high hardness in the range of 60-62 HRC.
PVD (Physical Vapor Deposition) - the surface resistance of the blade and cutting edge has been increased using a vacuum deposition method applied to deposit thin layers by condensing the vaporized form of the desired material onto the surface of the workpiece. The coating method involves a purely physical process, such as high-temperature vacuum evaporation followed by condensation. The applied coating has very high hardness, which significantly increases the blade’s resistance to rust and abrasive wear.
B-Lock (Crossbar Lock) - a crossbar that moves horizontally within longitudinal slots in the steel side plates of the handle frame. When the knife is opened, the locking bar engages from above with the rear part of the blade, preventing it from moving back. This bar is held in place by two springs. Unlocking occurs by pulling the locking bar backward; its ends are accessible through notches in the side plates of the handle. In the closed position, the bar presses against a cam surface at the rear of the blade, preventing it from opening spontaneously. The advantages of the B-Lock mechanism include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both the right and left hand, and smooth operation.
Blade - sheepfoot-style sheepfoot with a black PVD coating. The gently curved cutting edge tapers toward the safe tip of the wide blade. The blade thickness and high, flat grind provide excellent cutting edge geometry and extreme cutting performance. Ceramic ball bearings ensure smooth and seamless operation of the mechanism and assist in opening the blade via a double-sided pin in the blade. On the blade spine, upper jimping, a serrated thumb rest. B-Lock locking mechanism.
Handle - stainless steel liners, milled with a Frag pattern on the surface for a better grip. Mirror polishing gives it an elegant look. The open-backed construction reduces weight and facilitates cleaning. The pivot axis is adorned with the company logo. The simple, solid construction ensures many years of reliable use. The pivot is adorned with the manufacturer’s stylized logo. A two-position (right/left) steel deep carry clip allows you to carry the knife discreetly in your pocket in the tip-up position (blade tip facing up). Above the clip is a lanyard hole for a safety or decorative cord.
Technical specifications:
Product number: BMK06-S-6
Product name: Cicada's Wing Mirror Polished Frag Stainless Steel, Black PVD
Overall length: 183.0 mm / 7.2“
Blade length: 80.0 mm / 3.15”
Blade thickness: 2.3 mm / 0.09“
Handle length: 103.0 mm / 4.05”
Handle thickness: N/A
Weight: 112.0 g / 3.95 oz
Blade material: 10Cr15MoV
Blade hardness: N/A
Blade grind: Flat
Blade finish: Black PVD coating
Handle material: Frag Pattern Stainless Steel
Handle finish color: Mirror Polished Grey
Backspacer material: Stainless Steel
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Caged Ceramic Ball Bearings
Lock: B-Lock
Opening method: Manual, dual thumb stud
Additional accessories: N/A
Designer: Bestechman
Brand: Bestechman
Manufacturer: Bestech Knives
Country of origin: P.R.C
Compiled by: Sharg®
