Third by Decor Habitat Higonokami Knife, Copper, Hammered / Satin 420 (N17-6)
- The Third N17-6 is a lightweight folding knife inspired by the traditional Higonokami design. It features a copper handle paired with a 420 steel blade in a Falcata profile, with a hammered finish and a satin-finished cutting edge.
15,43 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Third N17-6 Copper, Hammered/Satin 420 – Higonokami folding knife
The Third N17-6 is a lightweight folding knife inspired by the traditional Higonokami design. It combines a copper handle with a 420 steel blade featuring a Falcata profile, a hammered finish, and a satin-finished cutting edge.
The model features a friction folder design, without a mechanical blade lock. The distinctive shape of the handle, made from bent sheet metal, its manual operation, and light weight give it a simple, traditional character, while the included sheath makes it easy to store and carry.
420 steel blade
The blade is made of 420 steel, which performs well in lightweight utility knives thanks to its corrosion resistance and ease of maintenance. A flat grind was used, providing a versatile geometry for basic cutting tasks.
Falcata Profile and Hammered/Satin Finish
The blade features a Falcata profile and a two-tone finish. The upper portion of the surface has a hammered texture, while the area near the cutting edge has a satin finish, creating a distinct contrast between the two surfaces.
Higonokami Copper Handle
The handle is made of copper in the form of a curved element that wraps around the blade tang—a design characteristic of Higonokami knives. The backspacer is an integral part of the handle, and the copper itself may naturally change color over time and develop a patina.
Friction Folder without a mechanical lock
The Third N17-6 does not use a classic Liner Lock or Back Lock mechanism. The blade is held in the open position by friction resistance, and the protruding element at the base of the blade acts as a lever when opening the knife and as a thumb rest during use.
Why Choose the Third N17-6?
This model stands out thanks to its traditional Higonokami construction, copper handle, and an unusual combination of hammered and satin-finished blade surfaces. It’s an interesting choice for those looking for a lightweight folding knife with a simple mechanism and distinctive Japanese styling.
Key Features at a Glance
- 420 steel – blade material.
- Flat – flat grind.
- Falcata – blade profile.
- Hammered / Satin – hammered and satin finish.
- Copper – copper handle with traditional Higonokami construction.
- Friction Folder – no mechanical blade lock.
- Manual – manual opening.
- Sheath – sheath included.
Technical Specifications
| Product Number | TH-N17-6 |
| Product Name | Third N17-6 Copper, Hammered/Satin 420 |
| Overall Length | 165.0 mm / 6.50“ |
| Blade Length | 74.0 mm / 2.91” |
| Blade Thickness | 2.77 mm / 0.11“ |
| Handle Length | 91.0 mm / 3.58” |
| Handle Thickness | N/A |
| Weight | 45.0 g / 1.59 oz |
| Blade material | 420 |
| Blade hardness (HRC) | N/A |
| Blade grind | Flat |
| Blade finish | Hammered / Satin |
| Handle material | Copper |
| Handle color/finish | Copper |
| Backspacer material | Copper – integral part of the handle |
| Backspacer color | Copper |
| Clip | None |
| Clip material | None |
| Pivot pin | N/A |
| Lock | None – Friction Folder |
| Opening mechanism | Manual |
| Additional accessories | Leatherette Sheath |
| Designer | Decor Habitat |
| Brand | Third |
| Manufacturer | Decor Habitat SL |
| Country of Origin | N/A |
Frequently Asked Questions
How do I sharpen the 420 steel in the Third N17-6 knife?
420 steel is relatively easy to sharpen and works well with standard water stones, ceramic sharpeners, and guided sharpening systems. When sharpening, it’s important to maintain a consistent angle and avoid applying excessive pressure.
How do you care for the steel and the copper handle?
After coming into contact with moisture, wipe the blade dry and thoroughly dry it; periodically, you can protect it with a thin layer of a suitable preservative. Copper may naturally develop a patina and change color over time, which is a typical characteristic of this material.
How does the Friction Folder mechanism work in the Higonokami?
The blade is not mechanically locked but is held in place by friction between the structural components. During use, your thumb may additionally press down on the protruding lever at the base of the blade, so handling requires more attention than with knives featuring a classic lock.
And if you want to take good care of your knife, use the Pruciak Protektor products available in our store
Prepared by: Specialists at Sharg® – Your expert in EDC and cutting tools


















