Reate PL-XE Knife Orange G10, Black PVD Nitro-V (PL-XE-ORG10.PVD)
- EN-XE Orange G10, Black PVD, unusual EDC folder with intuitive lock integrated into the pivot. Comfortable handle made of durable Micarta composite, versatile blade made of excellent Nitro-V steel. Convenient handling for right and left-handed users.
139,27 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Reate PL-XE Orange G10, Black PVD Nitro-V (PL-XE-ORG10.PVD) – EDC folding knife with Pivot Lock and Black PVD blade
The Reate PL-XE Orange G10, Black PVD Nitro-V (PL-XE-ORG10.PVD) is a folding EDC knife designed for users who expect durable steel, comfortable handling, and a lightweight construction with a G10 handle. The blade, made of Nitro-V steel with a drop point profile, a flat grind, and a Black PVD coating, is engineered for corrosion resistance, efficient cutting, and reduced glare. The G10 handle ensures a secure grip, high durability, and good control during use. The Pivot Lock, ceramic ball bearings, a blade hole, and a reversible tip-up clip enhance the practicality of the PL-XE model.
Nitro-V – stainless steel for everyday use
Nitro-V is a stainless steel valued for its corrosion resistance, good impact strength, and stable edge retention in everyday knives. In the PL-XE model, it performs well when cutting cardboard, tape, plastic film, cord, packaging, and technical materials, where predictable blade performance is essential. A hardness of 60 HRC ensures practical edge retention while allowing for efficient maintenance using ceramic, water stone, or a diamond sharpener.
Drop point and flat grind – versatile geometry with a black PVD coating
The drop point profile ensures good tip control, stable blade guidance, and the versatility needed for everyday EDC. The flat grind facilitates smooth cutting through cardboard, plastic wrap, plastics, and other everyday materials, reducing resistance during prolonged cutting. The blade, coated with Black PVD coating, gains a more technical look, reduced glare, and improved surface durability during regular use.
G10 and Pivot Lock – a secure grip and intuitive unlocking
The handle made of G10 offers high resistance to moisture, temperature changes, and the typical mechanical stresses associated with daily carry. The textured surface improves grip stability, while the chamfered edges reduce sharp pressure points during a firmer grip. Pivot Lock is integrated into the pivot axis and allows you to unlock the blade by squeezing the mechanism with your fingers, without the classic sliding of the lock bar.
Why choose the Reate PL-XE Orange G10 for your gear?
The Reate PL-XE Orange G10 is designed for those looking for a modern EDC folder with a durable handle, moisture-resistant steel, and a convenient lock integrated into the pivot. Nitro-V performs well for everyday cutting, the drop point profile ensures versatility, and ceramic ball bearings support smooth blade operation. The open-backed construction with stainless steel spacers facilitates cleaning and reduces dirt buildup. It’s a practical choice for EDC, technical work, opening packages, cutting cardboard, and light outdoor tasks.
Key features at a glance
- Nitro-V — corrosion resistance and good impact strength.
- Drop point — versatile tip and edge control.
- Flat grind — smooth cutting of cardboard, plastic film, and tape.
- Black PVD coating — reduced glare and surface protection.
- G10 — durable handle resistant to wear and tear.
- Pivot Lock — lock integrated with the pivot axis.
Technical Specifications
| Product Number | PL-XE-ORG10.PVD |
| Product Name | Reate PL-XE Orange G10, Black PVD Nitro-V |
| Overall length | 203.00 mm / 8.0" |
| Blade length | 86.40 mm / 3.4“ |
| Blade thickness | 3.90 mm / 0.154” |
| Handle length | 119.00 mm / 4.7" |
| Handle thickness | N/A |
| Weight | 133.00 g / 4.7 oz |
| Blade material | Nitro-V |
| Blade hardness (HRC) | 60 HRC |
| Blade edge | Flat |
| Blade finish | Black PVD coating |
| Handle material | G10 |
| Handle color/finish | Orange |
| Backspacer material | Stainless Steel |
| Backspacer color | Black |
| Clip | Right / Left, tip-up |
| Clip material | Titanium |
| Pivot pin | Ceramic ball bearings |
| Lock | Pivot Lock |
| Opening mechanism | Manual, thumb hole |
| Additional accessories | None |
| Designer | Reate Knives |
| Brand | Reate Knives |
| Manufacturer | Reate Knives, Inc. |
| Country of origin | China |
Frequently Asked Questions
How to care for and sharpen the Nitro-V steel in the Reate PL-XE model?
Nitro-V steel should be cleaned and dried after use, especially after contact with moisture, sweat, food, or debris from cut materials. Ceramic, water stone, or a diamond sharpener with moderate grit work well for sharpening, as Nitro-V allows you to efficiently restore a sharp, even edge.
How does the Pivot Lock work?
Pivot Lock is a lock integrated into the pivot axis, which is released by squeezing the mechanism with your fingers. This solution allows you to quickly unlock the blade without the classic sliding motion of a liner lock or frame lock, but when folding, you still need to control the blade’s movement and keep your fingers away from the cutting edge.
What makes the Black PVD coating stand out?
Black PVD coating is a black coating applied using the physical vapor deposition method, which increases the blade’s surface hardness. In practice, it reduces glare, gives the knife a technical look, and helps protect the blade’s surface during daily use.
What tasks is the Reate PL-XE Orange G10 best suited for?
The Reate PL-XE Orange G10 is best suited for everyday EDC, opening packages, and cutting cardboard, tape, plastic wrap, cord, and technical materials. The drop point profile, flat grind, and Nitro-V steel create a versatile combination for light to medium-duty tasks.
Is the open-backed design practical?
Yes, the open-backed design makes it easier to clean the inside of the handle and reduces the accumulation of dust, fibers, and fine debris. In this model, stainless steel components serve as spacers, which we refer to as the backspacer in the technical specifications.
Prepared by: Specialists at Sharg® – Your expert in EDC and cutting tools
Viper Katla LE No 088/150 Red G10, Dark Stonewashed M390 by Jesper Voxnæs/Jens Ansø Knife (V5984GR3D)
