Kubey KB Elang Knife Bronze Titanium, Black DLC S35VN by Sebastian Irawan (KB339C)
- Elang Bronze Titanium, Black DLC a large folding knife designed by Sebastian Irawan. The blade is made of S35VN steel, and it features a straight, comfortable titanium handle. It opens via thumb hole and is secured with a Frame Lock mechanism.
0,00 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Kubey KB Elang Bronze Titanium Folding Knife, Black DLC S35VN by Sebastian Irawan (KB339C)
The Kubey KB Elang KB339C is the most striking version of Sebastian Irawan’s design. The black Crucible CPM S35VN blade is paired with a titanium handle in a bronze finish, creating a distinctive combination of black and bronze.
The 98.00 mm Sheepsfoot blade features a high flat grind and a black DLC coating. Opening via the blade hole is supported by ceramic ball bearings, and stability when open is ensured by the Frame Lock.
Crucible CPM S35VN and 60–62 HRC
Crucible CPM S35VN steel offers good resistance to wear, corrosion, and chipping, while the hardness range of 60–62 HRC promotes long-lasting sharpness while maintaining reasonable sharpenability.
Sheepsfoot, High Flat, and black DLC coating
The Sheepsfoot profile provides a large cutting edge and good tip control. The high-flat grind supports efficient cutting, while the black DLC coating gives the blade a dark, technical look that contrasts sharply with the brown titanium handle.
Bronze Titanium and Frame Lock
The titanium handle is finished in bronze. The bronze backspacer and the titanium clip in the same shade create a cohesive finish for the entire design. Ceramic ball bearings ensure smooth operation, and once opened, the blade is locked in place by the Frame Lock.
Key Features at a Glance
- Crucible CPM S35VN — steel with a hardness of 60–62 HRC.
- Sheepsfoot — a profile designed for controlled, practical cutting.
- High Flat — a high, flat grind.
- Black DLC — a black coating on the blade.
- Bronze Titanium — bronze finish on the titanium handle.
- Frame Lock — lock mechanism featuring a titanium frame.
- Ceramic ball bearings — smooth operation of the mechanism.
- Blade hole — manual opening.
- Bronze titanium clip — right-side, tip-up.
Technical data
| Product Number | KB339C |
| Product Name | Kubey KB Elang Bronze Titanium, Black DLC S35VN by Sebastian Irawan |
| Overall Length | 224.00 mm / 8.82“ |
| Blade Length | 98.00 mm / 3.86” |
| Blade Thickness | 4.00 mm / 0.16“ |
| Handle Length | 126.00 mm / 4.96” |
| Handle Thickness | 15.00 mm / 0.59" |
| Weight | 125.00 g / 4.41 oz |
| Blade Material | Crucible CPM S35VN |
| Blade hardness (HRC) | 60–62 HRC |
| Blade grind | High Flat |
| Blade finish | Black DLC |
| Handle material | Titanium |
| Handle finish color | Bronze |
| Backspacer material | Titanium |
| Backspacer color | Bronze |
| Clip | Right-hand, tip-up |
| Clip material | Titanium |
| Pivot pin | Caged Ceramic Ball Bearing |
| Lock | Frame Lock |
| Opening mechanism | Manual, Thumb Hole |
| Additional Accessories | None |
| Designer | Sebastian Irawan |
| Brand | KB |
| Manufacturer | Kubey Knife |
| Country of origin | P.R.C. |
Frequently Asked Questions
How do I care for CPM S35VN steel?
It’s a good idea to clean and dry the blade regularly. Although S35VN resists corrosion well, proper care helps maintain the blade’s sharpness and appearance for longer.
How do I care for the DLC coating?
It’s best to use a soft cloth and a mild cleaner. Avoid harsh abrasives, which can leave marks on the coating.
How does the Frame Lock work?
When opened, a section of the titanium handle slides behind the blade root and locks it in the open position. Releasing this mechanism allows you to close the knife.
How do you clean a bronze-colored titanium handle?
It’s best to wipe the surface with a soft, slightly damp cloth and then dry it thoroughly. This helps minimize the buildup of visible residue and dirt.
How to maintain ceramic ball bearings?
It’s important to keep the pivot clean and protect it from excessive dust. For maintenance, a small amount of a suitable lubricant designed for knife mechanisms is sufficient.
Prepared by: Specialists at Sharg® company – Your expert in EDC and cutting tools
