WE Knife Zonda Gray Titanium/ Twill Carbon Fiber, Silver Bead Blasted CPM 20CV by Kellen Bogardus (WE22016-2)
- Zonda Gray Titanium / Twill Carbon Fiber, Silver Bead Blasted, the result of a collaboration between Kellen Bogardus and WeKnife. A striking EDC folding knife in CPM 20CV steel, with an integral backspacer. The perfect companion!
491,67 €
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Zonda Gray Titanium / Twill Carbon Fiber, Silver Bead Blasted, the result of a collaboration between Kellen Bogardus and WE. A striking folding knife in CPM 20CV steel, a versatile EDC with an integral backspacer. The perfect companion for those who want to stand out from the crowd!
CPM S20CV - one of the best tool steels in the world, American premium martensitic stainless steel. Manufactured by US Crucible Industries according to the Crucible® Particle Metallurgy (CPM) process. The CPM process yields a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 19.0% carbon, 20.0% chromium, 4.0% vanadium, 1.0% molybdenum and 0.6% tungsten. The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - Clip Point type, finished masking minor scratches with Bead Blasted method. The gently curved cutting edge converges towards the needle-sharp tip of the knife. The small thickness of the blade, combined with a high, flat grind, results in excellent cutting edge geometry and extreme cutting performance. To improve piercing capabilities, an unsharpened false blade is brought out at the top. Ceramic ball bearings support the opening of the blade with a quick index-finger flipper (flipper) when opened acting as a stag. The entire blade is locked with the proven and popular frame lock with a steel insert to prevent wiping of the lock face.
Handle - made of solid titanium 6AL4V with blue accents. Contouring of the covers eliminates sharp edges. The grips are connected to each other with a flame-dyed titanium integral backspacer. Showing off the EC engineers is an inlay made of Twill Carbon Fiber into which another inlay is inserted, this time of flame-dyed titanium. A single-position clip (right), made of titanium, allows the knife to be carried in tip-up position. The pivot is decorated with a stylized manufacturer's logo.
Case - included zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE22016-2
Product name: Zonda Gray Titanium / Twill Carbon Fiber, Silver Bead Blasted
Overall length: 226.1 mm / 8.9"
Blade length: 102.8 mm / 4.05"
Blade thickness: 3.2 mm / 0.13"
Handle length: 123.3 mm / 4.85"
Handle thickness: 13.4 mm / 0.53"
Weight: 116.7 g / 4.12 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade Finish: Silver Bead Blasted
Handle material: 6AL4V Titanium with Twill Carbon Fiber & Flamed Titanium Inlay.
Handle finish color: Gray, Black, Flamed
Backspacer material: 6AL4V Titanium
Backspacer Color: Flamed
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Frame Lock
Opening method: Manual, flipper
Additional accessories: Pouch
Designer: Kellen Bogardus
Brand name: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Developed by: the Sharg® company.
