Kubey Drake Knife Black G10, Sandblasted 14C28N by Maksim Tkaczuk (KB239E)
- Drake Black G10, Sandblast strong folder, project of ukrainian knifemaker Max Tkachuk. Two different blade opening options, a ball-bearing pivot, a sheepfoot blade made of 14C28N steel and the legendary quality for which Kubey brand is famous. Bestseller!
53,24 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Drake Black G10, Sandblasted large and strong E.D.C. folder, a project of the Ukrainian knifemaker Maksim Tkachuk. Two different options for opening the head, ball-bearing pivot, sheepfoot head made of 14C28N steel and the legendary quality of workmanship for which the Kubey brand is famous. Excellent value for money! Bestseller!
Max Tkachuk - graphic and industrial designer, one of the most recognizable Ukrainian knifemakers. He uses his experience and skills to create knives that are functional and aesthetically pleasing. Maksim follows the principle "less is more" in his work.
Kubey Knife - is a knife manufacturer whose motto is "An Edge Above The Rest." They produce top-quality knives at affordable prices, offering a wide range of materials with exceptional fit and finish, as well as ultra-smooth operation. Kubey Knife delivers some of the best cutting tools on the market, ensuring outstanding value for their price. These knives are built to serve you reliably for years to come!
14C28N - martensitic chromium stainless steel is the latest development in the range of knife steels produced by Swedish Sandvik steel mills. The optimized chemical composition with a unique combination provides superior quality, excellent edge performance, high hardness and corrosion resistance. By reducing the amount of carbon 0.62% (C) and increasing the chromium content 14.0% (Cr), as well as adding nitrogen 0.11% (N), corrosion resistance has been significantly improved. Considered an improved version of 13C26 steel. Unbeatable in the price / quality category!
Vacuum & Cryogenic - the 14C28N steel undergoes a specialized heat treatment process involving two key stages. Vacuum Heat Treatment: the steel is heated in a vacuum environment, minimizing oxidation and ensuring more uniform metal properties. This process enhances the strength and structural integrity of the steel. Cryogenic Treatment: after heating, the steel is rapidly cooled to extremely low temperatures, often below -100°C (-148°F). This transformation converts residual austenite into martensite, significantly increasing hardness, wear resistance, and overall durability. These advanced treatments enable 14C28N steel to deliver exceptional performance, offering both razor-sharp edge retention and remarkable blade longevity.
Blade - sheepfoot type. Finished with a scratch-concealing Sandblasted method, a process in which fine sand particles are ejected under pressure onto the blade to give a stylish and practical look. The long, slender cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind guarantees excellent cutting properties. Ceramic ball bearings are responsible for the smooth and smooth operation of the blade advancement mechanism. The flipper flipper flipper when opened forms a mini-guard preventing the hand from slipping on the blade. We can also open the knife with the help of a hole milled in the wedge. On the back of the upper jimping wedge, a notched thumb rest. Liner-Lock mechanism.
Handle - black G10 (pressure-pressed fiberglass with synthetic resin) facings,textured to improve grip security, screwed to the steel frame of the knife. The whole thing is bolted to a solid backspacer, also made of G10. The simple, solid design gives you the confidence of many years of use. A deep finger undercut (fore finger groove) improves grip security. The pivot axis is decorated with a screw with a stylized manufacturer's logo. A single-position (right-side) titanium deep-carry clip allows you to carry the knife discreetly in your pocket in tip-up position (blade tip up). Above the clip a lanyard hole, a hole for threading a safety or decorative cord.
Technical data:
Product number: KB239E
Product name: Drake, Black G10, Sandblasted 14C28N
Overall length: 220.0 mm / 8.66"
Blade length: 95.0 mm / 3.74"
Handle length: 125.0 mm / 4.92"
Thickness of blade: 3.1 mm / 0.12"
Handle thickness: 17.0 mm / 0.67"
Weight: 130.0 g / 4.59 oz
Blade material: Sandvik 14C28N
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Sand Blasted
Handle material: G10
Handle finish color: Black
Backspacer material: G10
Backspacer color: Black
Clip: Right, Tip-Up
Clip material: Titanium
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Liner Lock
Opening method: Manual, flipper, thumb hole
Additional accessories: n.d.
Designer: Maksim Tkachuk (Максим Ткачук)
Brand: Kubey
Manufacturer: Kubey Knife
Country of origin: P.R.C.
Development: the Sharg® company
in our loyalty program.