250,80 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
MSI S/E Ram-Lok Bazooka Green Tri-Grip Polymer, Cerakote Bazooka Green folding knife that combines strength, durability and elegance. Its blade is made of excellent M390MK steel , which is the result of cooperation between two renowned companies - Microtech and Böhler. This steel is known for its exceptional strength and long sharpness retention, making this knife unafraid of any challenge. The intuitive RAM-Lok lock ensures safety during use. This innovative lock is easy to operate and provides ease of use for both right and left-handed people. The Handle of the knife is made of polymer, durable and ergonomic. Its shape is designed to fit perfectly in the hand, ensuring comfort even during prolonged use. This knife is not only a tool, but also a work of applied art. Its designer, Anthony Marfione, founder and owner of Microtech, has taken care of every detail. From the elegant black finish to the satin details, this knife is both beautiful and practical. Whether you're looking for a reliable tool or an elegant accessory, the MSI (Microtech Standard Issue) folder will meet your needs.
M390MK - thanks to a collaboration between Microtech and Böhler engineers, an exclusive version of M390 steel made only for Microtech was created. The carbon content has been increased and subjected to closer scrutiny thus improving the properties of M390 steel to provide better edge retention, corrosion resistance and polishing. Martensitic high-performance chromium steel produced by powder metallurgy. Due to its alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 19.0% (Cr) doped with 1.95% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Ram-Lok (Crossbar Lock) - a crossbar that moves horizontally in longitudinal cutouts in the steel side plates of the handle frame. When the knife is opened, the locking bar overlaps the back of the blade from above, preventing its return movement. This beam is pressed down by two springs. Unlocking is done by pulling back the locking bar, the ends of which are accessible through cutouts in the grips on the sides of the Handle grips. In the locked position, the bar presses against the cam surface at the rear of the blade, preventing it from opening on its own. Advantages of the Ram-Lok lock include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both right and left hands, and lightweight operation.
Cerakote™ - a ceramic-based finish that can be applied to metals to improve a range of physical properties, including abrasion/wear resistance and corrosion resistance. Thin-film non-reflective, low-friction matte protective coating resistant to heat, chemicals and impact. Provides durability and hardness.
Blade - machine ground Sheepfoot type , single sided S/E (Single Edge) sharpened. Coated with Cerakote Bazooka Green coating . Opening by means of a hole in the wedge (thumb hole) so that it can be easily used by right and left-handed people . The blade is derived with a high flat grind (Flat Grind), giving excellent cutting edge geometry and extreme cutting performance. In order to maintain full control over the blade on the back of the wedge was made upper jimping, notched thumb rest. The entire blade is locked with a convenient Ram-Lok lock .
Handle - made of durable polymer in Bazooka Green color . For a better grip covered with Tri-Grip texture. Wide locking slide with Microtech's characteristic stepped X-structure. Both grips are bolted together with a solid aluminum backspacer. The double-sided (right / left) clip allows you to discreetly carry the knife in tip-up position. Above the clip a lanyard hole, a place for a safety or decorative cord.
Technical data:
Product number: 210T-1 PMFBO
Product name: MSI® S/E Ram-Lok™ Bazooka Green Tri-Grip Polymer, Cerakote Bazooka Green Standard.
Overall length: 226.0 mm / 8.9"
Blade Length: 97.8 mm / 3.85"
Blade Thickness: 3.8 mm / 0.15"
Handle length: 128.0 mm / 5.05"
Handle thickness: 14.0 mm / 0.55"
Weight: 133.0 g / 4.7 oz
Blade material: Böhler M390MK
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Cerakote Bazooka Green
Handle material: Polymer
Handle finish color: Bazooka Green
Backspacer material: 6061-T6 Aluminum
Backspacer color: Bazooka Green
Clip: Right/left, Tip-up
Clip material: Stainless Steel
Pivot mechanism: n.d.
Locking mechanism: Ram-Lok
Opening method: Manual, thumb hole
Additional accessories: none
Designer: Anthony Marfione
Brand: Microtech Knives
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: the Sharg® company
For over three decades, Microtech knives have stood as a benchmark of precision, innovation, and reliability. Founded by Anthony Marfione, the brand has revolutionized the world of automatic and OTF knives, becoming the go-to choice for professionals, collectors, and outdoor enthusiasts alike. Thanks to official distribution via Sharg.pl, Polish users now have access to genuine Microtech models that blend military-grade performance with everyday practicality and prestige.
