Microtech Ultratech S/E Gen III ZBP OTF Knife Natural Clear Aluminum, Apocalyptic M390MK by Tony Marfione (1121-10APNC)
- Ultratech S/E Gen III ZBP Natural Clear Aluminium, Apocalyptic offers a range of enhancements: an improved glass breaker, along with key innovations such as the Crud Kutter™, Dual-Fuel Drive Train™, and Zero Blade Play™.
579,31 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Ultratech S/E Gen III ZBP Natural Clear Aluminum, Apocalyptic is the new version of the Ultratech series - the first OTF knife from Microtech without any blade play after opening! The “blade play free” automatic knife features a number of improvements, such as Crud Kutter™, Dual-Fuel Drive Train™, Zero Blade Play™. The handle has also been redesigned and features solutions known from other models. Working in D/A (Double Action) mode, it allows the blade to be quickly extended and retracted with a flick of the thumb. The design by Tony Marfione, owner of Microtech Knives, combines modern design with the highest quality of workmanship
Zero Blade Play™ - a redesigned blade locking system that eliminates the problem of most OTF knives, i.e. play on the blade after opening.
Dual-Fuel Drive Train™ - an updated knife opening/closing system, the mechanism works more smoothly and requires less force to open/close the knife.
Crud Kutter™ - a series of diagonal cuts under the opening slider, prevents the accumulation of dirt that could interfere with the opening mechanism.
Ultratech OTF Line - the flagship Microtech model from the OTF line, which has set the standard for all Out The Front knives. Proprietary Ultratech trigger spring design that remains in a “resting” position at all times except when in use. This means that the spring does not wear out, reducing wear and tear on the internal release mechanisms, ensuring that the knife will always work effectively. Its light weight, the ability to open and close with one hand, the slim shape of the handle and the sharp blade make this a one-of-a-kind knife, available only from Microtech.
M390MK - thanks to the cooperation of Microtech and Böhler engineers, an exclusive version of M390 steel has been created, made only for Microtech. The carbon content has been increased and subjected to more thorough control, improving the properties of M390 steel to ensure better edge retention, corrosion resistance and polishing. A martensitic high-performance chromium steel produced using powder metallurgy. Due to the alloy concept, it is characterized by extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it keeps its edge well, which means that the blade stays sharp for a very long time (minimal maintenance required). Another advantage is that it is resistant to “wire” formation during sharpening. Steel with a high chromium content of 19.0% (Cr) with an admixture of 1.95% carbon (C), vanadium 4.0% (V), hardened to 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - machine-ground S/E (Single Edge) Drop Point, sharpened on one side. Finished with an impressive Apocalyptic patina. The blade is finished with a high flat grind, which ensures excellent cutting properties. This gives the knife excellent piercing properties while maintaining high strength. The powerful Dual-Fuel Drive Train™ blade extension/retraction mechanism, operated by a knurled Thumb Slide, a stepped thumb slider, requires a certain amount of force to overcome the spring resistance for safety. The opening method ensures trouble-free opening for both right- and left-handed users. The Crud Kutter™ system cuts under the slider to prevent dirt build-up.
Handle - made with precision in 3D technology on CNC milling machines, from brushed and polished 6061-T6 aluminum. The blade features a deeply engraved Microtech logo, the claw of a bird of prey. The texture of the handle ensures that the knife does not slip in the hand during use. There are jimping on the spine and bottom of the handle for a more secure grip. Traditional Torx screws are used to tighten the grips, which makes servicing the knife very easy. The slim profile and milled two-position (right/left) solid titanium deep carry clip allow the knife to be carried discreetly in the pocket in a tip-down position. Equipped with a smooth rollerball, thanks to which the knife easily slides into the pocket without damaging the edges. The handle is finished with a new version of the glass breaker, a steel pyramid with a pressed-in tungsten carbide ball. There is a hole at the back of the handle for attaching a decorative cord.
Technical data:
Product number: 1121-10APNC
Product name: Ultratech S/E Gen III ZBP Natural Clear Aluminum, Apocalyptic
Overall length: 216.0 mm / 8.5”
Blade length: 88.9 mm / 3.5”
Blade thickness: 3.17 mm / 0.125”
Handle length: 127.0 mm / 5.0”
Handle thickness: 13.1 mm / 0.515”
Weight: 102.3 g / 3.61 oz
Blade material: Böhler M390MK
Blade hardness: n/a
Blade grinding: Flat
Blade finish: Apocalyptic
Handle material: 6061-T6 Aluminum
Handle finish color: Natural Clear
Backspacer material: 6061-T6 Aluminum
Backspacer color: Natural Clear
Clip: Right / left, Tip-down
Clip material: Titanium
Pivot mechanism: Dual-Fuel Drive Train™
Lock: Zero Blade Play™ Slide Lock
Opening method: Automatic, push/pull Thumb slider
Additional accessories: None
Designer: Tony Marfione
Brand: Microtech
Manufacturer: Microtech Knives
Country of origin: USA
Development: Sharg® company
